Table of Contents
Advertisement
Command Reference Guide
voice class-of-service <set name>
Use the voice class-of-service command to create a voice class of service (CoS) rule set and to enter the
Voice Class of Service command set. These additional commands are covered in
on page
3807. Use the no form of this command to delete a configured CoS rule set.
Syntax Description
<set name>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example creates a new
(config)#voice class-of-service set1
Configuring New Level "set1".
(config-cos-set1)#
60000CRG0-35E
Specifies the name of the
Command was introduced.
CoS
rule set called set1:
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
CoS
rule set.
Voice CoS Command Set
1385
Advertisement
Table of Contents
