ADTRAN AOS Version R10.1.0 Command Reference Manual page 1362

Command Reference Guide
telnet-server <port>
Use the telnet-server command to specify an alternate Transmission Control Protocol (TCP) port for
Telnet servers. Use the no form of this command to return to the default setting.
Syntax Description
<port>
Default Values
By default, the Telnet server listens on TCP port 23.
Command History
Release 18.2
Release R10.1.0
Usage Examples
The following example configures the Telnet server to listen on TCP port 2323, instead of the default port
23:
(config)#ip telnet-server 2323
To return to the default setting, use the no form of the command. For example:
(config)#no telnet-server 2200
60000CRG0-35E
Specifies the alternate TCP port for the Telnet server.
Command was introduced. This command replaces the ip telnet-server
<port> command for ADTRAN internetworking products only.
Command was introduced. This command replaces the ip telnet-server
<port> command for ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1362