Table of Contents
Advertisement
Command Reference Guide
voice ani-list <name>
Use the voice ani-list command to create a list of automatic number identification (ANI) information and
enter the ANI list configuration mode. Use the no form of this command to remove the ANI list.
Additional subcommands are available once you have entered the ANI list configuration mode:
ani <template>
Syntax Description
<name>
ani <template>
Default Values
By default, no ANI lists are configured.
Command History
Release A2
Functional Notes
ANI lists are used to permit or deny specific calling parties from accessing trunk groups to which the ANI
list is applied.
The available wildcards for this command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
The special characters ( ), -, + are always ignored.
Examples: 1) 555-81xx matches 555-8100 to 555-8199.
2) 555-812[012] matches 555-8120 to 555-8122.
3) Nxx-xxxx matches 7 digit local.
4) 1-Nxx-Nxx-xxxx matches long distance calls in North America.
60000CRG0-35E
Specifies the name of the ANI list.
Specifies the ANI digits of the calling party to add to the ANI list. Digits
include a combination of wildcards and numerical digits. Refer to the
Functional Notes of this command for more information on using wildcards.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1377
Advertisement
Table of Contents
