Command Reference Guide
voice grouped-trunk <trunk id>
Use the voice grouped-trunk command to create a grouped trunk and to enter the Grouped Trunk
command set. Refer to
Voice Trunk Group Command Set on page 3430
command to delete a configured grouped trunk.
Syntax Description
<trunk id>
Default Values
By default, there are no configured grouped trunks.
Command History
Release 9.3
Usage Examples
The following example creates the trunk group trunk3:
(config)#voice grouped-trunk trunk3
(config-TRUNK3)#
60000CRG0-35E
Specifies the name of the trunk group.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for details. Use the no form of this
1408