ADTRAN AOS Version R10.1.0 Command Reference Manual page 1415

Command Reference Guide
voice mail check
Use the voice mail check command to configure user parameters for the voicemail check extension. Use
the no form of this command to disable the setting. Variations of this command include the following:
voice mail check alias <name>
voice mail check sip-identity <station> <Txx>
voice mail check sip-identity <station> <Txx> register
voice mail check sip-identity <station> <Txx> register auth-name <username> password <password>
Syntax Description
alias <name>
sip-identity <station> <Txx>
register
auth-name <username>
password <password>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example configures the voice mail check sip-identity to use extension 6000 as its identity
on trunk T04:
(config)#voice mail check sip-identity 6000 T04
60000CRG0-35E
Specifies an alias name to use as an alternate when accessing the
check extension.
Specifies the station to be used for Session Initiation Protocol (SIP)
trunk (e.g., station extension). Also, specifies the SIP trunk through
which to register the server. The trunk is specified in the format Txx
(e.g., T01).
Registers the user to the server.
Sets the user name that will be required as authentication for
registration to the SIP server.
Sets the password that will be required as authentication for
registration to the SIP server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1415