ADTRAN AOS Version R10.1.0 Command Reference Manual page 1427

Command Reference Guide
voice paging-group <extension>
Use the voice paging-group command to create a new handset paging group and enter the paging group's
configuration. Use the no form of this command to remove the paging group.
Syntax Description
<extension>
Default Values
By default, no paging groups exist.
Command History
Release A2.04
Functional Notes
The voice paging-group command enters the configuration for a handset paging group. For more
information about handset paging, refer to the Handset Paging for the NetVanta 7000 Series quick
configuration guide available online at
For more information about the commands used to configure handset paging, refer to the
Group Command Set on page
Usage Examples
The following example creates a paging group using extension 8956 and enters the group's configuration
mode:
(config)#voice paging-group 8956
Configuring new paging group "8956".
(config-8956)#
60000CRG0-35E
Specifies the numeric extension for the paging group.
Command was introduced.
https://supportforums.adtran.com
3402.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
(article number 3102).
Voice Paging
1427