Table of Contents
Advertisement
Command Reference Guide
vlan <vlan id>
Use the vlan command to enter the Virtual Local Area Network (VLAN) Configuration mode. Use the no
form of this command to remove a VLAN ID. Refer to the
information.
Syntax Description
<vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Usage Examples
The following example enters the VLAN Configuration mode for VLAN 1:
(config)#vlan 1
(config-vlan 1)#
60000CRG0-35E
Specifies a valid VLAN ID. Range is 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
VLAN Command Set on page 2690
for more
1375
Advertisement
Table of Contents
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers