ADTRAN AOS Version R10.1.0 Command Reference Manual page 1388

Command Reference Guide
voice codec-priority
Use the voice codec-priority command to specify which coder-decoder (CODEC) list is set as the priority.
Use the no form of this command to disable the setting. Variations of this command include:
voice codec-priority trunk
voice codec-priority user
voice codec-priority offer-sdp
Syntax Description
trunk
user
offer-sdp
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release A2
Functional Notes
The voice codec-priority command specifies the CODEC selection method at the unit's global level.
Selections are made from preconfigured CODEC lists. For more information about configuring and
applying CODEC lists, refer to the
Usage Examples
The following example specifies using the trunk's CODEC list as the priority CODEC list:
(config)#voice codec-priority trunk
60000CRG0-35E
Specifies using the trunk's CODEC list as the priority CODEC list.
Specifies using the user's CODEC list as the priority CODEC list.
Specifies using Session Description Protocol (SDP) offer/answer
exchanges to set CODEC priority.
Command was introduced.
Command was expanded to include the offer-sdp parameter.
Voice CODEC List Command Set on page
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
3803.
1388