Command Reference Guide
voice loopback <number>
Use the voice loopback command to configure the auto attendant options for the system. Use the no form
of the commands to disable the setting. For more voice loopback account options, refer to
Account Command Set on page
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release A1
Usage Examples
The following example creates a loopback with extension (account) number 5555:
(config)#voice loopback 5555
60000CRG0-35E
3679.
Specifies the extension for the loopback account.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Voice Loopback
1413