Table of Contents
Advertisement
Command Reference Guide
voice spre-mode
Use the voice spre-mode command to control whether special prefix (SPRE) codes will be interpreted by
the unit locally or forwarded to the network for interpretation. The override parameter indicates that the
specified SPRE code is to be overridden. Use the no form of this command to return to the default setting.
Variations of this command include:
voice spre-mode local
voice spre-mode network
voice spre-mode override *<nx>
Syntax Description
local
network
override *<nx>
Default Values
By default, this command is set to forward SPRE codes to the network and no overrides are configured.
Command History
Release 11.1
Release A2.03
Functional Note
SPRE codes are used to map a sequence of digits to a particular functionality. For example, in a typical
network, *67 is used to block caller ID. When the AOS unit is configured to operate in network mode, the
digits are collected and sent to the network for appropriate handling. Using the override parameter allows
the unit to be configured so that certain SPRE codes are collected locally and the corresponding function is
initiated.
Usage Examples
The following example configures the unit to interpret SPRE codes:
(config)#voice spre-mode local
The following example configures the unit, which is configured to use the network mode, to instead
interpret the SPRE code *67 locally:
(config)#voice spre-mode network
(config)#voice spre-mode override *67
60000CRG0-35E
Specifies that SPRE codes are interpreted locally by the unit.
Specifies the forwarding of SPRE codes to the network for handling.
Indicates the configured SPRE processing mode is overridden for the
specified SPRE code. Valid range for n is 2 to 9. Valid range for x is 0 to 9.
Command was introduced.
Command was expanded to include the override option.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1435
Advertisement
Table of Contents
