ADTRAN AOS Version R10.1.0 Command Reference Manual page 1393

Command Reference Guide
voice country-code <number>
Use the voice country-code command to enter the country code for this location. The country code is used
to determine if an incoming call is international. If a call originates from the Session Initiation Protocol
(SIP) wide area network (WAN) and it matches the voice country-code number, the call is not
international and the country code is stripped before passing the call to the customer premises equipment
(CPE). Use the no form of this command to delete the country code.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example specifies a voice country-code of 203:
(config)#voice country-code 203
60000CRG0-35E
Specifies the country code of this location (three digit maximum).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1393