ADTRAN AOS Version R10.1.0 Command Reference Manual page 1425

Command Reference Guide
voice overhead-paging connected-timeout <value>
Use the voice overhead-paging connected-timeout command to specify the timeout interval before an
overhead paging call is terminated. Use the no form of this command to return to the default setting.
This setting does not affect calls placed into handset paging groups. It only affects calls to
the overhead paging port on the back of the AOS unit.
Syntax Description
<value>
Default Values
The default setting is 120 seconds.
Command History
Release A2.04
Usage Examples
The following example configures a connected timeout of 30 seconds for overhead paging:
(config)#voice overhead-paging connected-timeout 30
60000CRG0-35E
Specifies the timeout value in seconds. Set to 0 to disable the timeout.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1425