Command Reference Guide
voice ring-group <number>
Use the voice ring-group command to create or modify ring group parameters. These additional
commands are covered in
command to delete a configured ring group.
Syntax Description
<number>
Default Values
By default, no ring groups are configured.
Command History
Release 9.3
Usage Examples
The following example creates a new ring group with extension 5678:
(config)#voice ring-group 5678
Configuring New Group "5678".
(config-5678)#
60000CRG0-35E
Voice Ring Group Command Set on page
Specifies the ring group's four-digit extension.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
3407. Use the no form of this
1431