ADTRAN AOS Version R10.1.0 Command Reference Manual page 1373

Command Reference Guide
username <username> password <password>
Use the username password command to configure the user name and password to use for all protocols
requiring a user name-based authentication system, including File Transfer Protocol (FTP) server
authentication, line (login local-user list), and Hypertext Transfer Protocol (HTTP) access. Use the no
form of this command to remove a user name and password.
Syntax Description
<username>
<password>
Default Values
By default, there is no established user name and password.
Command History
Release 1.1
Functional Notes
All users defined using the username/password command are valid for access to the unit using the login
local-userlist command.
Usage Examples
The following example creates a user name of ADTRAN with password ADTRAN:
(config)#username ADTRAN password ADTRAN
60000CRG0-35E
Specifies a user name using an alphanumerical string up to 30 characters in
length (the user name is case sensitive).
Specifies a password using an alphanumerical string up to 30 characters in
length (the password is case sensitive).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1373