ADTRAN AOS Version R10.1.0 Command Reference Manual page 1420

Command Reference Guide
voice mgcp-endpoint <index>
Use the voice mgcp-endpoint command to create a Media Gateway Control Protocol (MGCP) endpoint,
assign it an index, and enter the endpoint configuration mode. Use the no form of this command to destroy
the specified endpoint.
Syntax Description
<index>
Default Values
By default, no endpoints are configured.
Command History
Release A2
Functional Notes
By default, when endpoints are created and given an index number, they are named in the following
format: aaln/x, where x is the index number. For example, an endpoint with an index of 4 will by default
have the name aaln/4. The most common way of defining the index is to use the FXS port number,
because the index is automatically appended to aaln/ for the endpoint name.
Assigning an index is essential for creating an endpoint; however, endpoints can be renamed using the
name endpoint command. Refer to
Usage Examples
The following example creates an endpoint with an index of 1, and enters the endpoint's configuration
mode:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#
60000CRG0-35E
Specifies the numerical value of the endpoint as part of the endpoint's
default naming structure. Range is 1 to 255.
Command was introduced.
name <text> on page 3239
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for more information.
1420