ADTRAN AOS Version R10.1.0 Command Reference Manual page 1404

Command Reference Guide
voice feature-mode
Use the voice feature-mode command to configure control of the voice features. Use the no form of this
command to return to the default setting. Variations of this command include:
voice feature-mode local
voice feature-mode network
Syntax Description
local
network
Default Values
By default, the voice feature mode is set to network.
Command History
Release 9.3
Usage Examples
The following example sets the control of the voice features to the local unit:
(config)#voice feature-mode local
60000CRG0-35E
Allows voice features to be handled by the local unit.
Allows voice features to be handled by the network.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1404