ADTRAN AOS Version R10.1.0 Command Reference Manual page 1395

Command Reference Guide
voice current-mode
Use the voice current-mode command to activate a particular system mode on the unit. Variations of this
command include:
voice current-mode custom1
voice current-mode custom2
voice current-mode custom3
voice current-mode default
voice current-mode lunch
voice current-mode night
voice current-mode override
voice current-mode weekend
Syntax Description
[custom1-custom3]
default
lunch
night
override
weekend
Default Values
By default, the system mode is set to default.
Command History
Release A1
Functional Notes
This command is used to put the unit into a specific system mode. The unit remains in the activated system
mode until it is changed manually or a schedule change occurs triggering a transition to another system
mode. Schedules are configured using the command
If the system is in override, the unit will ignore any schedule that exists. The unit will stay in override until
manually changed. This command is saved into the dynvoice-config file to preserve the state of the unit in
case of power failure.
Usage Examples
The following example sets the current system mode to lunch:
(config)#voice current-mode lunch
60000CRG0-35E
Specifies the custom system mode to use.
Specifies using the default system mode.
Specifies using the lunch time system mode.
Specifies using the night time system mode.
Specifies using the override system mode.
Specifies using the weekend system mode.
Command was introduced.
voice system-mode on page
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1445.
1395