ADTRAN AOS Version R10.1.0 Command Reference Manual page 1387

Command Reference Guide
voice codec-list <name>
Use the voice codec-list command to create a named coder-decoder (CODEC) list for call negotiation and
to enter the CODEC list configuration mode. Use the no form of this command to delete a configured
CODEC list.
Syntax Description
<name>
Default Values
By default, there are no configured voice CODEC lists.
Command History
Release 9.3
Functional Notes
CODEC lists are list of CODECs arranged in preferred order with the first listed CODEC being the most
preferred for call negotiation. Using the voice codec-list command enters the configuration mode for the
CODEC list, where you can enter the types of CODECs to be used, and their order of preference. CODEC
lists are then applied to interfaces, voice trunks, or voice accounts to be used for call negotiation. For more
information on configuring and applying CODEC lists, refer to
3803.
Usage Examples
The following example creates a new CODEC list named List1:
(config)#voice codec-list List1
Configuring New Codec List "List1".
(config-codec)#
60000CRG0-35E
Specifies the CODEC list name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Voice CODEC List Command Set on page
1387