Table of Contents
Advertisement
Command Reference Guide
voice match ani <template> substitute <template>
Use the voice match ani substitute command to configure automatic number identification (ANI)
substitution for inbound voice trunks. Use the no form of this command to remove the substitution.
Variations of this command include:
voice match ani <template> substitute <template>
Syntax Description
ani <template>
substitute <template>
Default Values
By default, no ANI substitution is configured.
Command History
Release A2
Functional Notes
The convention for ANI templates is very similar to dial plan entries. The available wildcards for this
command are:
0-9 = Match exact digit only.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
The special characters ( ), -, and + are always ignored in the template. The following are example template
entries using wildcards:
Examples: 1) 555-81xx matches 555-8100 to 555-8199.
2) 555-812[012] matches 555-8120 to 555-8122.
3) Nxx-xxxx matches 7 digit local.
4) 1-Nxx-Nxx-xxxx matches long distance calls in North America.
60000CRG0-35E
Specifies the ANI information to be substituted. This information is entered
using wildcards and numerical digits. Refer to the Functional Notes of this
command for available wildcards and proper data entry.
Specifies the ANI information that is substituted for the original ANI
information. This information is entered using wildcards and numerical
digits. Refer to the Functional Notes of this command for available wildcards
and proper data entry.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1418
Advertisement
Table of Contents
