Table of Contents
Advertisement
Command Reference Guide
voice conference local
Use the voice conference local command to configure the local conference feature. The voice
conferencing-mode command must be first set to local before these commands will take effect. Refer to
voice conferencing-mode on page
Variations of this command include:
voice conference local max-sessions <number>
voice conference local originator flashhook drop
voice conference local originator flashhook ignore
voice conference local originator flashhook split
voice conference local originator onhook persist
voice conference local originator onhook terminate
voice conference local party-disconnect continue
voice conference local party-disconnect transfer
Syntax Description
max-sessions <number>
originator
flashhook drop
flashhook ignore
flashhook split
onhook persist
onhook terminate
party-disconnect
continue
transfer
Default Values
By default, the max-sessions is set to 3, originator onhook is set to persist, originator flashhook is set
to drop, and party-disconnect is set to continue.
60000CRG0-35E
1392. Use the no form of this command to return to the default setting.
Specifies the maximum number of simultaneous 3-way conference
sessions. If set to 0, the maximum number of sessions is defined by the
capability of the hardware platform.
Specifies the behavior of actions performed by the conference originator
once the conference has been established.
Indicates that when a flashhook is issued, the last party added to the 3-way
conference will be dropped and the call will continue between the two
remaining parties.
Indicates that when a flashhook is issued, it will be ignored. The 3-way
conference will continue without interruption.
Indicates that when a flashhook is issued, the 3-way conference will be split
into two calls, one between the originator and the first party and one
between the originator and the second party. When a flashhook is issued
after the split, it will toggle the originator between the two calls.
Indicates that when the originator goes on-hook, the two parties in the
conference are connected together.
Indicates that when the originator goes on-hook, the remaining parties are
disconnected.
Specifies the conference behavior after a member disconnects.
Indicates the conference is maintained with the remaining parties.
Indicates the conference is dropped and a direct connection between the
remaining parties is re-established.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1390
Advertisement
Table of Contents
