ADTRAN AOS Version R10.1.0 Command Reference Manual page 1409

Command Reference Guide
voice hold-reminder
Use the voice hold-reminder command to specify how long a call can be on hold before the hold reminder
rings the phone again. Use the no form of this command to return to the default setting. Variations of this
command include:
voice hold-reminder <value>
voice hold-reminder <value> <interval>
Syntax Description
<value>
<interval>
Default Values
The defaults for this command are a 10-second hold time before the first reminder ring with 30-second
intervals between subsequent rings.
Command History
Release 11.1
Usage Examples
The following example sets the first reminder ring to occur after the call has been on hold for 20 seconds
(with subsequent reminder rings occurring every 15 seconds until the call is picked up):
(config)#voice hold-reminder 20 15
60000CRG0-35E
Specifies how long a call can be on hold before the hold reminder rings the
phone again. Range is 5 to 30 seconds.
Optional. Specifies the interval at which all subsequent reminder rings will
occur. Range is 10 to 120 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1409