ADTRAN AOS Version R10.1.0 Command Reference Manual page 1392

Command Reference Guide
voice conferencing-mode
Use the voice conferencing-mode command to determine if voice conferencing bridging will be handled
within the unit or from a far-end conferencing server. Use the no form of this command to return to the
default setting. Variations of this command include:
voice conferencing-mode local
voice conferencing-mode network
Syntax Description
local
network
Default Values
By default, the voice conferencing mode is set to network.
Command History
Release A1
Functional Notes
The voice conferencing mode is only valid when the flashhook mode is set to interpreted. Refer to the
command voice flashhook mode on page 1405
Usage Examples
The following example sets the conferencing mode to handle conference bridging within the local unit:
(config)#voice conferencing-mode local
60000CRG0-35E
Specifies voice conferencing will be handled within the unit.
Specifies voice conferencing will be handled by a far-end conferencing
server.
Command was introduced.
for more information.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1392