Tftp Server - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

tftp server

Use the tftp server command to enable the Trivial File Transfer Protocol (TFTP) server. The
default-filesystem parameter specifies the default location for the TFTP server to retrieve and store files.
Use the no form of this command to disable the TFTP server. Variations of this command include:
tftp server
tftp server overwrite
tftp server default-filesystem cflash
tftp server default-filesystem flash
tftp server default-filesystem usbdrive0
Syntax Description
overwrite
default-filesystem cflash
default-filesystem flash
default-filesystem usbdrive0
Default Values
By default, this command is disabled.
Command History
Release 9.3
Release 13.1
Release 17.3
Release 18.2
Release R10.1.0
Usage Examples
The following example enables the TFTP server:
(config)#tftp server
The following example specifies CompactFlash as the default file system:
(config)#tftp server default-filesystem cflash
60000CRG0-35E
Enables the TFTP server to overwrite existing files.
Optional. Specifies that the TFTP server use CompactFlash
default file system.
Optional. Specifies that the TFTP server use flash as the default file
system.
Optional. Specifies that the TFTP server use Universal Serial Bus
(USB) flash drive memory as the default file system.
Command was introduced.
Command was expanded to include the overwrite feature.
Command was expanded to include the default-filesystem parameter.
Command was changed from ip tftp server to tftp server to accommodate
Internet Protocol version 6 (IPv6) for ADTRAN internetworking products
only. In addition, the command was expanded to include the usbdrive0
parameter.
Command was changed from ip tftp server to tftp server to accommodate
Internet Protocol version 6 (IPv6) for ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
®
as the
1365