Table of Contents
Advertisement
Command Reference Guide
voice call-appearance-mode
Use the voice call-appearance-mode command to configure the unit to allow single or multiple call
appearances to user account phones. Use the no form of this command to return to the default setting.
Variations of this command include:
voice call-appearance-mode multiple
voice call-appearance-mode single
Syntax Description
multiple
single
Default Values
By default, this is set to single.
Command History
Release 11.1
Functional Notes
Each incoming call is classified as a call appearance. For example, call waiting supports two call
appearances simultaneously. Without call waiting, only one call appearance is supported at a time.
Usage Examples
The following example sets the unit to allow multiple call appearances:
(config)#voice call-appearance-mode multiple
60000CRG0-35E
Allows multiple call appearances. For analog phones, this will be limited to
two; for Session Initiation Protocol (SIP) phones, the number allowed
depends on the model of the phone.
Allows only a single call appearance.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1380
Advertisement
Table of Contents
