ADTRAN AOS Version R10.1.0 Command Reference Manual page 1369

Command Reference Guide
thresholds
Use the thresholds command to specify DS1 performance counter thresholds. Use the no form of this
command to return to the default setting. Variations of this command include:
thresholds BES [15Min | 24Hr] <number>
thresholds CSS [15Min | 24Hr] <number>
thresholds DM [15Min | 24Hr] <number>
thresholds ES [15Min | 24Hr] <number>
thresholds LCV [15Min | 24Hr] <number>
thresholds LES [15Min | 24Hr] <number>
thresholds PCV [15Min | 24Hr] <number>
thresholds SEFS [15Min | 24Hr] <number>
thresholds SES [15Min | 24Hr] <number>
thresholds UAS [15Min | 24Hr] <number>
Threshold settings are applied to ALL DS1s.
Syntax Description
BES
CSS
DM
ES
LCV
LES
PCV
SEFS
SES
UAS
15Min
24Hr
<number>
60000CRG0-35E
Specifies the bursty errored seconds threshold.
Specifies the controlled slip seconds threshold.
Specifies the degraded minutes threshold.
Specifies the errored seconds threshold.
Specifies the line code violations threshold.
Specifies the line errored seconds threshold.
Specifies the path coding violations threshold.
Specifies the severely errored framing seconds threshold.
Specifies the severely errored seconds threshold.
Specifies the unavailable seconds threshold.
Specifies that the threshold you are setting is for the counter's 15-minute
statistics.
Specifies that the threshold you are setting is for the counter's 24-hour
statistics.
Specifies the maximum occurrences allowed for this error type. Once a
threshold is exceeded, an event is sent to the console specifying the
appropriate counter. Additionally, if Simple Network Management Protocol
(SNMP) traps are enabled, the unit will send a trap with the same
information as the console event.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1369