Table of Contents
Advertisement
Command Reference Guide
voice spre <pattern id> <pattern>
Use the voice spre command to add a global special prefix (SPRE) complete pattern. This command
allows users to enter a custom SPRE code. Use the no form of this command to delete a configured SPRE
pattern.
Syntax Description
<pattern id>
<pattern>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Functional Notes
This command allows users to enter a SPRE code pattern. Patterns begin with * or #. If the pattern is
followed by an &, then the dial plan number-complete templates are used to determine when the unit has
enough digits to dial the number (for example, 67&). However, if a dial plan does not exist for a particular
code that is needed, then a SPRE code may be entered followed by an independent dial plan
number-complete template (for example, *67NXX-XXXX). The available wildcards for this command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
The special characters ( ), -, + are always ignored.
Examples: 1) 555-81xx matches 555-8100 to 555-8199.
2) 555-812[012] matches 555-8120 to 555-8122.
3) Nxx-xxxx matches 7 digit local.
4) 1-Nxx-Nxx-xxxx matches long distance calls in North America.
Usage Examples
The following sets the complete pattern for SPRE 1:
(config)#voice spre 1 *67NXX-XXXX
60000CRG0-35E
Specifies the SPRE pattern ID. Valid range is 1 to 255.
Specifies the SPRE pattern. Refer to Functional Notes below for more
information.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1434
Advertisement
Table of Contents
