ADTRAN AOS Version R10.1.0 Command Reference Manual page 1401

Command Reference Guide
voice disconnect-mode
Use the voice disconnect-mode command to control the disconnect mode of the unit. Use the no form of
this command to return to the default setting. Variations of this command include:
voice disconnect-mode dialtone
voice disconnect-mode fast-busy
Syntax Description
dialtone
fast-busy
Default Values
By default, this command is set to dialtone.
Command History
Release A2.03
Usage Examples
The following example configures the unit to disconnect issuing a fast-busy tone:
(config)#voice disconnect-mode fast-busy
60000CRG0-35E
Specifies issuing dial tone after disconnect on the unit.
Specifies issuing fast-busy tone after disconnect on the unit.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1401