Renesas RX100 Series User Manual page 993

RX13T Group
Table 32.8 DC Characteristics (5)
Conditions: VCC = 2.7 V to 5.5 V, AVCC0 = VCC to 5.5 V, VSS = AVSS0 = 0 V, T
Item
Permissible total consumption power*
Permissible total consumption power*
Note: Please contact a Renesas Electronics sales office for information on the derating of the G-version product. Derating is the
systematic reduction of load for the sake of improved reliability.
Note 1. Total power dissipated by the entire chip (including output currents)
Table 32.9 DC Characteristics (6)
Conditions: VCC = 2.7 V to 5.5 V, AVCC0 = VCC to 5.5 V, VSS = AVSS0 = 0 V, T
Analog power During A/D conversion
supply current (when the sample-and-hold circuit and
programmable gain amplifier are in use)
During A/D conversion
(when the sample-and-hold circuit is in use but
the programmable gain amplifier is not)
During A/D conversion
(when the sample-and-hold circuit is not in use
but the programmable gain amplifier is)
During A/D conversion
(when neither the sample-and-hold circuit nor
the programmable gain amplifier is in use)
During D/A conversion*
Waiting for A/D and D/A conversion (all units)
Comparator C Comparator enabled (per channel)
3
operating current*
Note 1. The value of the D/A converter is the value of the power supply current including the reference current.
Note 2. When VCC = AVCC0 = 5 V.
Note 3. Current consumed only by the comparator C module.
Table 32.10 DC Characteristics (7)
Conditions: VCC = 2.7 V to 5.5 V, AVCC0 = VCC to 5.5 V, VSS = AVSS0 = 0 V, T
Item
Power-on VCC rising At normal startup
gradient
Voltage monitoring 0 reset
enabled at startup*
Note 1. When OFS1.LVDAS = 0.
Note 2. Turn on the power supply voltage according to the normal startup rising gradient because the register settings set by OFS1 are
not read in boot mode.
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
Symbol Typ.
1
Pd —
1
Pd —
Item
1
Symbol
SrVCC
1, * 2
= –40 to +105°C
a
Max. Unit
300 mW D-version product
105 mW G-version product
= –40 to +105°C
a
2
Symbol Min. Typ.*
I — 4.6
AVCC
— 3.1
— 2.5
— 1.0
— 0.7
— —
I — 40
CMP
= –40 to +105°C
a
Min. Typ. Max.
0.02 — 20
0.02 — —
32. Electrical Characteristics
Test Conditions
Max. Unit Test Conditions
6.9 mA
4.8
3.9
1.8
1.0
1.4 μA
60 μA
Unit Test Conditions
ms/V
Page 993 of 1041