Understanding Cli Error Messages - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

Understanding CLI Error Messages

The following table lists and defines some of the more common error messages given in the CLI
Message
%Ambiguous command
%Unrecognized command
%Invalid or incomplete
command
%Invalid input detected at
"^" marker
60000CRG0-35E
Helpful Hints
The command may not be valid in the current command mode, or you
may not have entered enough correct characters for the command to be
recognized. Try using the ? command to determine your error. Refer to
Using CLI Shortcuts on page 20
The command may not be valid in the current command mode, or you
may not have entered all of the pertinent information required to make
the command valid. Try using the ? command to determine your error.
Refer to Using CLI Shortcuts on page 20
The error in command entry is located where the caret (^) mark appears.
Enter a question mark at the prompt. The system displays a list of
applicable commands or gives syntax information for the entry.
Copyright © 2012 ADTRAN, Inc.
Understanding CLI Error Messages
for more information.
for more information.
.
22