Command Reference Guide
Voice Services Command Sets
Voice services command sets deal with the configuration and implementation of various voice services
within your network. The commands allow you to configure voice features to improve network operation,
set voicemail parameters, and monitor your voice network.
The following table gives a small example of the voice services command sets. For a more detailed
description, refer to
Command Descriptions on page
Command Set Accessed By...
Voice Services
Specifying the voice service
you would like to configure at
the Global Configuration mode
prompt as follows:
>enable
#config
(config)#voice autoattendant
Example 1212
Virtual Private Network (VPN) Parameter Command Sets
The virtual private network (VPN) parameter command sets deal with the encryption and security on your
private network. To allow you the utmost in security, the VPN parameter commands allow you to
configure how your unit will behave as it communicates with other devices. VPN command sets allow you
to configure Internet key exchange (IKE) parameters, crypto parameters, and certificate parameters.
The following table gives an example of the VPN parameter commands. For a more detailed listing of
commands, refer to
Command Descriptions on page
Command Set Accessed By...
VPN Parameters Specifying which parameter you
wish to set at the Global
Configuration mode prompt as
follows:
>enable
#config
(config)#crypto ca certificate
chain MyProfile
60000CRG0-35E
23.
Sample Prompt With This Set You Can...
(config-aa1212)#
23.
Sample Prompt With This Set You Can...
(config-cert-
chain)#
Copyright © 2012 ADTRAN, Inc.
Configuration Command Sets
•
Set parameters for class of
service (CoS) on the voice
network, configure voicemail
and auto attendant, use voice
quality monitoring reporters,
and more
•
Specify the behaviors and
permissions of voice features
within the network
•
Determine how your unit
authenticates communication
•
Set the parameters for keeping
your unit secure
19