Command Reference Guide
Voice Trunks Command Sets
Voice trunks command sets deal with the configuration of voice trunks within your network. The
commands allow you to configure various trunks and specify how these trunks function.
The following table gives a small example of the voice trunks command sets. For a more detailed
description, refer to
Command Descriptions on page
Command Set Accessed By...
Voice Trunks
Specifying the voice trunk type
you would like to configure at
the Global Configuration mode
prompt as follows:
>enable
#config
(config)#voice trunk t01
Voice Accounts Command Sets
Voice accounts command sets deal with the configuration and organization of differing accounts within
your voice network. The commands allow you to configure such items as user permissions, voice line
behaviors, and voice loopback services.
The following table gives a small example of the voice accounts command sets. For a more detailed
description, refer to
Command Descriptions on page
Command Set Accessed By...
Voice Accounts
Specifying the voice account
you would like to configure at
the Global Configuration mode
prompt as follows:
>enable
#config
(config)#voice user 4444
60000CRG0-35E
23.
Sample Prompt With This Set You Can...
(config-t01)#
23.
Sample Prompt With This Set You Can...
(config-4444)#
Copyright © 2012 ADTRAN, Inc.
Configuration Command Sets
•
Set parameters for analog
trunks, T1 trunks, Session
Initiation Protocol (SIP) trunks,
and more
•
Specify the behaviors and
permissions of these trunks
•
Set parameters for user
accounts, line accounts, and
loopback accounts
•
Specify the behaviors and
permissions of these accounts
within the voice network
18