Command Reference Guide
voice transfer
Use the voice transfer command to set the unattended transfer for the system only. Use the no form of this
command to return to the default setting. Variations of this command include:
voice transfer blind
voice transfer unattended
Syntax Description
blind
unattended
Default Values
The default setting is unattended.
Command History
Release 15.1
Usage Examples
The following example configures the voice transfer type to blind:
(config)#voice transfer blind
60000CRG0-35E
Converts unattended transfer attempts to RFC 3891-compliant blind
transfers.
Unattended transfer attempts are not modified.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1448