ADTRAN AOS Version R10.1.0 Command Reference Manual page 1449

Command Reference Guide
voice transfer-mode
Use the voice transfer-mode command to specify whether transferred calls will be controlled by the unit
locally, or if the network will control them. Use the no form of this command to return to the default
setting. Variations of this command include:
voice transfer-mode local
voice transfer-mode network
Syntax Description
local
network
Default Values
By default, the network controls call transfers.
Command History
Release 11.1
Usage Examples
The following example configures the unit to handle call transfers:
(config)#voice transfer-mode local
60000CRG0-35E
Specifies that call transferring is controlled locally by the unit.
Specifies that call transferring is controlled by the network.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1449