Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
Once a nondefault VRF is created, it must be assigned to the appropriate interfaces. Use the
voip
name-service host on page 1456
to assign interfaces to the VRF. By default, interfaces are assigned to the
default VRF. An interface can only be assigned to one VRF, but multiple interfaces can be assigned to the
same VRF.
Usage Examples
The following example creates the VRF Red and assigns the 2-byte route distinguisher 2:2:
(config)#vrf RED route-distinguisher as-2byte 2:2
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1461
Advertisement
Table of Contents
