ADTRAN AOS Version R10.1.0 Command Reference Manual page 1476

Command Reference Guide
login local-userlist
Use the login local-userlist command to enable security login for the terminal session. It is required to
configure user names and passwords using the username/password command from the Global
Configuration mode (refer to
form of this command to disable the login local-userlist feature.
All user properties assigned using the username/password command are valid when using
the login local-userlist command.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set to access the unit.
Command History
Release 1.1
Usage Examples
The following example displays creating a local userlist and enabling the security login feature on the
CONSOLE port:
(config)#username my_user password my_password
(config)#line console 0
(config-con 0)#login local-userlist
When connecting to the unit, the following prompts are displayed:
User Access Login
Username: ADTRAN
Password:
Router#
60000CRG0-35E
username <username> password <password> on page
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Console) Interface Command Set
1373). Use the no
1476