ADTRAN AOS Version R10.1.0 Command Reference Manual page 1470

Command Reference Guide
databits <value>
Use the databits command to set the number of databits per character for a terminal session. This value
must match the configuration of your VT100 terminal or terminal emulator software. Use the no form of
this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the databits are set to 8.
Command History
Release 1.1
Usage Examples
The following example configures 7 databits per character for the console terminal session:
(config)#line console 0
(config-con 0)#databits 7
60000CRG0-35E
Specifies the data bits per character. Select from 7 or 8 databits per
character.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Console) Interface Command Set
1470