ADTRAN AOS Version R10.1.0 Command Reference Manual page 1471

Command Reference Guide
flowcontrol
Use the flowcontrol command to set flow control for the line console. Use the no form of this command to
return to the default setting. Variations of this command include:
flowcontrol none
flowcontrol software in
Syntax Description
none
software in
Default Values
By default, flow control is set to none.
Command History
Release 3.1
Usage Examples
The following example configures no flow control for the line console:
(config)#line console 0
(config-con 0)#flowcontrol none
60000CRG0-35E
Specifies no flow control.
Configures AOS to derive flow control from the attached device.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Console) Interface Command Set
1471