ADTRAN AOS Version R10.1.0 Command Reference Manual page 1479

Command Reference Guide
speed <rate>
Use the speed command to specify the data rate for the CONSOLE port. This setting must match your
VT100 terminal emulator or emulator software. Use the no form of this command to restore the default
value.
Syntax Description
<rate>
Default Values
By default, the speed is set to 9600 bps.
Command History
Release 1.1
Usage Examples
The following example configures the CONSOLE port for 19200 bps:
(config)#line console 0
(config-con 0)#speed 19200
60000CRG0-35E
Specifies rate of data transfer on the interface (2400; 4800; 9600; 19200;
38400; 57600; or 115200 bps).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (Console) Interface Command Set
1479