ADTRAN AOS Version R10.1.0 Command Reference Manual page 1486

Command Reference Guide
authorization exec <listname>
Use the authorization exec command to assign authentication, authorization, and accounting (AAA)
Enable mode authorization method lists to line interfaces. You must first turn AAA on for this command to
become available (using the command
the AAA Enable mode authorization method list from the interface. Variations of this command include:
authorization exec default
authorization exec <listname>
Syntax Description
default
<listname>
Default Values
By default, no AAA Enable mode authorization method list is applied to the line interface.
Command History
Release 13.1
Functional Notes
AAA Enable mode authorization method lists are used to allow or restrict user access to the privileged
command line interface (CLI) mode (Enable mode). For more information about configuring Enable mode
authorization lists, refer to the command
For more information about configuring AAA on your network, refer to the configuration guide Configuring
AAA in AOS available online at https://supportforums.adtran.com.
Usage Examples
The following example specifies that AAA Enable mode authorization list ExecList1 is applied to all secure
shell (SSH) lines:
(config)#line ssh 0 4
(config-ssh0-4)#authorization exec ExecList1
60000CRG0-35E
aaa on on page
Applies the default AAA Enable mode authorization method list to the
interface.
Applies the specified AAA Enable mode authorization method list to the
interface.
Command was introduced.
aaa authorization exec on page
Copyright © 2012 ADTRAN, Inc.
Line (SSH) Interface Command Set
889). Use the no form of this command to remove
883.
1486