ADTRAN AOS Version R10.1.0 Command Reference Manual page 1494

Command Reference Guide
line-timeout <value>
Use the line-timeout command to specify the number of minutes a line session may remain inactive before
AOS terminates the session. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the line-timeout is set to 15 minutes.
Command History
Release 11.1
Usage Examples
The following example specifies a timeout of 2 minutes for all secure shell (SSH) sessions:
(config)#line ssh 0 4
(config-ssh0-4)#line-timeout 2
60000CRG0-35E
Specifies the number of minutes a line session may remain inactive before
AOS terminates the session. Valid range: 0 to 35791.
Entering a line-timeout value of 0 disables the feature.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Line (SSH) Interface Command Set
1494