ADTRAN AOS Version R10.1.0 Command Reference Manual page 1502

Command Reference Guide
authorization commands <level> <listname>
Use the authorization commands command to assign authentication, authorization, and accounting
(AAA) command authorization method lists to line interfaces. You must first turn AAA on for this
command to become available (using the command
command to remove the AAA command authorization method list from the interface. Variations of this
command include:
authorization commands <level> default
authorization commands <level> <listname>
Syntax Description
<level>
default
<listname>
Default Values
By default, no AAA command authorization method list is applied to the line interface.
Command History
Release 11.1
Functional Notes
AAA command authorization method lists are used to allow or restrict the use of certain commands on a
per-user basis. For more information about configuring command authorization lists, refer to the command
aaa authorization commands <level> on page
For more information about configuring AAA on your network, refer to the configuration guide Configuring
AAA in AOS available online at https://supportforums.adtran.com.
Usage Examples
The following example specifies that AAA command authorization list Authorization1 is applied to all
Level 15 commands on all Telnet lines:
(config)#line telnet 0 4
(config-telnet0-4)#authorization commands 15 Authorization1
60000CRG0-35E
aaa on on page
Specifies whether the list applies to Level 1 (unprivileged) or Level 15
(privileged) commands.
Applies the default AAA command authorization method list to the interface.
Applies the specified AAA command authorization method list to the
interface.
Command was introduced.
878.
Copyright © 2012 ADTRAN, Inc.
Line (Telnet) Interface Command Set
889). Use the no form of this
1502