Command Reference Guide
Line (SSH) Interface Command Set
login
Use the login command to enable security login on the line session requiring the password configured
using the password command. Use the no form of this command to disable the login feature.
Syntax Description
No subcommands.
Default Values
By default, secure login is disabled.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example enables the security login feature and specifies a password (mypassword) on all
the available secure shell (SSH) sessions (0 through 4):
(config)#line ssh 0 4
(config-ssh0-4)#login
(config-ssh0-4)#password mypassword
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1495