Diagnostics
12.1 Event and fault handling
12.1.6.2
client config
Description
With this command, you enable one of the clients that processes or forwards the messages
of the device.
The following clients are available:
●
syslog
●
trap
●
email
Requirement
You are in the EVENTS Configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
client config {syslog|trap|email|all}
The parameters have the following meaning:
Parameter
syslog
trap
email
all
Result
The function of the client selected for the transfer is enabled.
Further notes
You display the status of the events and the clients with the
You disable a client with the
894
: sends the messages to the Syslog server
: sends the messages as SNMP trap to a configured recipient
: sends the messages as e-mail
Description
Enables the client that sends the messages to the Syslog server
Enables the client that sends the SNMP traps
Enables the client that sends the e-mails
Enables all clients at once
no client config
show events config
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.