Snmp; The "Show" Commands; Show Snmp; Show Snmp Community - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

SNMP

This section describes commands of the Simple Network Management Protocol (SNMP).

This section describes commands with which you display various settings.

This command shows the status information of SNMP.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

The status information is displayed.

This command shows the details of the configured of SNMP communities.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Network protocols