No Private-Vlan - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
private-vlan { primary | isolated | community }
The parameters have the following meaning:
Parameter
primary
isolated
community
Result
The PVLAN is defined and the PVLAN type specified.
Further notes
You delete the configuration as a private VLAN with the
You display this setting with the
6.1.4.6

no private-vlan

Description
With this command, you delete the configuration as a private VLAN.
Requirement
You are in the VLAN Configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call the command without parameter assignment:
no private-vlan
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
With this type, you define a primary PVLAN.
The primary PVLAN uses the VLAN ID of the
VLAN.
With this type, you define a secondary PVLAN.
Only one device can exist in this secondary PVLAN.
The secondary PVLAN has a specific VLAN ID.
With this type, you define a secondary PVLAN.
The devices in this secondary PVLAN can com-
municate with each other via layer 2. The second-
ary PVLAN has a specific VLAN ID.
show vlan private-vlan
Network structures
Range of values / note
-
-
-
command.
no private-vlan
command.
6.1 VLAN
223