4.1.3
Commands in the Plug configuration mode
This section describes commands that you can call up in the Plug Configuration mode.
In the Global Configuration mode, enter the
● If you exit the Plug Configuration mode with the
Configuration mode.
● If you exit the Plug Configuration mode with the
Privileged EXEC mode.
4.1.3.1
factoryclean
Description
With this command, you delete the device configuration stored on the PLUG.
Requirement
● There is a device configuration on the PLUG.
● You are in the Plug Configuration mode.
The command prompt is:
cli(config-plug)#
Syntax
Call the command without parameters:
factoryclean
Result
The device configuration on the PLUG is deleted.
4.1.3.2
write
Description
With this command, you format the PLUG and copy the current device configuration to it.
Requirement
● The PLUG is formatted.
● You are in the Plug Configuration mode.
The command prompt is:
cli(config-plug)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Functions specific to SCALANCE
command to change to this mode.
plug
command, you return to the Global
exit
command, you return to the
end
4.1 PLUG
145