Coordinates Height; Coordinates Latitude - Siemens SCALANCE XM-400 Configuration Manual

Result
Automatic logout is disabled.
Further notes
You enable automatic logout with the
You display the current timeout setting with the
3.1.12.3

coordinates height

Description
With this command, you enter a height coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates height <meter>
The parameter has the following meaning:
Parameter
meter
Result
The height coordinate is created.
3.1.12.4

coordinates latitude

Description
With this command, you enter a latitude coordinate.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
cli-console-timeout
Description
Input box for the height coordinate
command.
show cli-console-timeout
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the height coordinate in quotes:
coordinates height "123 456"
Configuration
3.1 System
command.
83