Configuration
3.1 System
Parameter
size
value
anycast
source
vlan
id
source_prefix
timeout
value
Result
The messages relating to the response of the called node are displayed.
3.1.11
traceroute
Description
With this command you enable the following of the route via which the packet comes to the
requested IP address.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
traceroute {ip <ip-address> | ipv6 <ip6-address>}
80
Description
Keyword for the size of the packets
to be transferred
Packet size
Addressing mode anycast
Keyword for the sender interface
VLAN
•
source_prefix
•
Keyword for a VLAN connection
Number of the addressed VLAN
Prefix of the sender
Response wait time
If this time expires, the request is
reported as "timed out".
Time until timeout
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values / note
-
0 ... 2080 bytes
Default: 100
-
-
-
1 ... 4094
-
-
1 ... 100 s
Default: 5