Show Versions; Clear Counters - Siemens SCALANCE XM-400 Configuration Manual

Result
The information is displayed.
3.1.1.18

show versions

Description
This command shows the version information of the entire system.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show versions
Result
The version information of the entire system is displayed.
3.1.2

clear counters

Description
With this command, you reset the counters of an interface.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
clear counters [<interface-type><interface-id>]
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
or
cli#
Configuration
3.1 System
73