Show Spanning-Tree Mst; Show Spanning-Tree Mst Configuration - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

show spanning-tree mst

This command shows various settings of the spanning tree configuration specific to a

Common Internal Spanning Tree (CIST) instance or a selected instance of the Multiple

Spanning Tree Protocol.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with one of the following parameter assignments:

show spanning-tree mst[<instance-id(1-64|4094)>][detail]

The parameters have the following meaning:

The settings for the spanning tree configuration are displayed.

Further notes

You display the general settings for the Spanning Tree Protocol with the

This command shows various settings for an instance of the Multiple Spanning Tree

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Number of the instance or range of

instances whose settings are displayed

Shows detailed information about the

selected interface

Network structures

6.3 Spanning Tree

Range of values / note

show spanning-tree